HELP UVB

Status
Not open for further replies.

RyuksMama

Hatchling Member
Help, i got a new uvb bulb and hood. Can i place this on top of the mesh? I know it blocks up to 50 percent of the uvb but i have a high output bulb. If not, how can i mount a hood
 

RyuksMama

Hatchling Member
Original Poster
101770-4272306552.jpg
101770-6259315875.jpg


This is the uvb hood I currently have, (I also have a heat bulb not featured in the photo.) The uvb bulb is a t5 HO 24W 10.0 reptisun UVB. I have a mesh cover on my enclosure. Do I need to mount this inside the tank? If so how and where in the tank?
 

CooperDragon

BD.org Sicko
Staff member
Moderator
Maybe. How much is intercepted depends on how fine the mesh top is really. Just need to adjust by making the basking area a little closer. Which bulb and fixture did you get? Is it a T5 with a reflector? If so, I'd say put the main basking area around 10'' below the bulb if it's shining through a mesh top. You can build some branches or climbs that allow closer access too.
 

CooperDragon

BD.org Sicko
Staff member
Moderator
Ah I see now. That's the ReptiSun T5 hood. It can sit on top. I'd just scoot it over so it's above the log and the hammock and next to the basking area. I'd probably turn the log into the main basking site.
 

RyuksMama

Hatchling Member
Original Poster
CooperDragon":1ufcrcyg said:
Ah I see now. That's the ReptiSun T5 hood. It can sit on top. I'd just scoot it over so it's above the log and the hammock and next to the basking area. I'd probably turn the log into the main basking site.


So where should I place his basking bulb then? To ensure he is getting both heat and UVB while basking?
 

RyuksMama

Hatchling Member
Original Poster
CooperDragon":11g6tk4r said:
Ah I see now. That's the ReptiSun T5 hood. It can sit on top. I'd just scoot it over so it's above the log and the hammock and next to the basking area. I'd probably turn the log into the main basking site.


101770-218342506.jpg
This is the space i have to work with. Maybe I could scoot the log forward and keep one of the lamps on the front part of the mesh?
 

RyuksMama

Hatchling Member
Original Poster
CooperDragon":1s544lb6 said:
Ah I see now. That's the ReptiSun T5 hood. It can sit on top. I'd just scoot it over so it's above the log and the hammock and next to the basking area. I'd probably turn the log into the main basking site.

101770-9639847362.jpg
So I did some rearranging. He is in his hammock all the time so I put the UVB on the front section of the mesh top above the hammock. And I kept the heat lamp on the back with the log as his basking spot. Does this setup look okay?
 

CooperDragon

BD.org Sicko
Staff member
Moderator
Yeah that should work. Just keep an eye on him and see how he reacts and how he uses the light so you can adjust to fit his preferences.
 
Status
Not open for further replies.

Members online

Latest resources

Latest posts

Latest profile posts

I just set Swordtail's timer for his bath and paused it so I could actually fill his soaking bowl up and he crawled over my phone and canceled the timer 🤣
Mirage came out of brumation on April 26. He was doing great. On May 2 he started acting funny. We just redid his tank, and he keeps going into one of his hides. He just lays there. He shows no intrest in food. HELP!
is tape safe for fixing something in my leopard geckos hide?
Day 3 of brumation. It's a struggle. I really miss my little guy. 😔
Mirage entered brumation yesterday, I'm gonna miss hanging out with my little guy.

Forum statistics

Threads
156,348
Messages
1,260,351
Members
76,199
Latest member
Lea K
Top Bottom