Do your timers create resistance on your bulbs?

Status
Not open for further replies.

Mixwell

New member
I noticed my bulbs would only register around 95 to 100 degrees when mounted to the timer. Thought maybe the bulb was getting worn out. Replaced the bulb and same effect. Then I plugged directly into the wall and BAM 106-108.

Does anyone know of a better, reasonable, timer than the 10 dollar sunbeam one at wally world?

I really don't have the schedule to be turning the lights on and off every morning and night. I also feel this has an effect on my juvenile beardies (Lemmy and Dimebag) digestion and growth. If it effects the basking bulb temp i'm sure it effects the frequency of the UVB bulb as well?

Any advice please and thanks :)
 

smauggle

Member
I have the zoomed 8 outlet timer, I can experiment with temps this weekend and get back to you. As far as UVB levels, I'm not equipped to measure, but logically it could make sense.
Do you have a reputable UVB bulb? Even if frequencies were 5-10%~ lower I think that would be sufficient
 

Mixwell

New member
Original Poster
Smauggle,
Thanks for the reply. I don't have a way of measuring radiant UVB either. But if you notice any temp change, that would be a big help. For now, I will check out the ZooMed timer.

I switched back to the timer last night so it would at least turn on this morning and so far, I am getting correct readings. Maybe there was a burn in time for the new bulb I got? It's a 100w Powersun UV. Seems to be fine and my guys are way more active even with just a few degree increase.

Thanks for the help friend!
 

CooperDragon

BD.org Sicko
Staff member
Moderator
I've noticed that the MVBs I've tested do take a while to get up to full power in terms of heat. I have gotten the expected readings in my setup for both UVB (from a T5 tube) and consistent heat from basking bulb (ZooMed Repti Basking 150w) while connected to a timer (Westek grounded 2 outlet mechanical).
 

smauggle

Member
Hopefully it was just a one-off issue and your temps are alright. I plugged straight into my wall yesterday and manually turned on all my light (150w bask, repti 10.0 T5, 40w LED)
Consistent with any other day, 110 on my basking rock, 72ish cool side. This was after about a 90 minute warm up, which is usually when we serve breakfast :D
 
Status
Not open for further replies.

Members online

Still Needs Help

Latest resources

Latest posts

Latest profile posts

Kubet77 là nhà cái đánh giá uy tín hoạt động từ năm 2005, có giấy phép bảo hộ từ PAGCOR, thu hút nhiều người chơi tại Việt Nam và Châu Á nhờ dịch vụ đáng tin cậy. Website: Kubet77 🎖️ Nhà Cái Cá Cược Trực Tuyến Đáng Chơi Nhất 2024 Địa chỉ: Số 27 Đường số 7, Cityland Park Hills,
Go88 là một trong những nhà cái cá cược trực tuyến hàng đầu với danh tiếng vững chắc trong cộng đồng người chơi.
Website: https://https://appgo88.link/
Tag: #appgo88link #go88link #Game_Go88 #Game_bài_Go88 #Cổng_game_Go88 #Tài_xỉu_Go88 #Nạp_tiền_Go88 #Rút_tiền_Go88 #play_Go88
Website:
https://smartcity.bandung.go.id/member/bsc3090527795d
Mirage came out of brumation on April 26. He was doing great. On May 2 he started acting funny. We just redid his tank, and he keeps going into one of his hides. He just lays there. He shows no intrest in food. HELP!
is tape safe for fixing something in my leopard geckos hide?
Day 3 of brumation. It's a struggle. I really miss my little guy. 😔

Forum statistics

Threads
156,244
Messages
1,259,364
Members
76,151
Latest member
TheAlee.DiegoShow
Top Bottom