Arcadia 14% unreflected UVI?

Status
Not open for further replies.

Rubble1212

Juvie Member
Beardie name(s)
Rubble
Hey just curious if anyone with a solar meter who enjoys testing different bulbs lol like I would do if I had a solar meter lol šŸ˜‚ would or has run some figures on an Arcadia 14% unreflected? I was curious if it would be similar to a 12% reflected as far as distance from bulb to basking surface? Thank you šŸ™
 

CooperDragon

BD.org Sicko
Staff member
Moderator
I haven't tested one of those yet (on the todo list). I did come across some results that include the 14% with no reflector. I'm not familiar with the source, so take it with a grain of salt. It looks like the 14% spits out UVI 4.8 at 22'' to start with, and degrades over the course of a year down to 1.6 (4.5 w/reflector, which is just about right IMO). There is a comparison to the 12%, but that is sitting at 13'' rather than 22''.

https://reptilenetworks.co.uk/wp-content/uploads/2021/01/UVBResults2020final-1.pdf
 

Rubble1212

Juvie Member
Original Poster
Beardie name(s)
Rubble
I haven't tested one of those yet (on the todo list). I did come across some results that include the 14% with no reflector. I'm not familiar with the source, so take it with a grain of salt. It looks like the 14% spits out UVI 4.8 at 22'' to start with, and degrades over the course of a year down to 1.6 (4.5 w/reflector, which is just about right IMO). There is a comparison to the 12%, but that is sitting at 13'' rather than 22''.

https://reptilenetworks.co.uk/wp-content/uploads/2021/01/UVBResults2020final-1.pdf
Wow so 22ā€ under the bulb without reflector still produces 4.8!! Am I reading that correctly? Or are those numbers all with the reflector so 22ā€ inches w/ reflector produces 4.8?
 

CooperDragon

BD.org Sicko
Staff member
Moderator
22'' with a reflector produces 7.2 (at first) and 4.8 without - these are pretty serious bulbs intended for very large spaces. That's why I usually recommend the 12% version in most cases.
 

Rubble1212

Juvie Member
Original Poster
Beardie name(s)
Rubble
22'' with a reflector produces 7.2 (at first) and 4.8 without - these are pretty serious bulbs intended for very large spaces. That's why I usually recommend the 12% version in most cases.
Holly smokes thatā€™s some serious power!!
 

Rubble1212

Juvie Member
Original Poster
Beardie name(s)
Rubble
Does
Holly smokes thatā€™s some serious power!!
is there any numbers for UVI as you move out from directly under the bulb? In most enclosures the basking bulb is several inches out from underneath the t5 I wish there was some data for those readings as you move out from directly underneath the bulb. In my case my basking area is 4/5 inches in front of the t5 and itā€™s about 10 inches from the bulb but itā€™s several inches in front and directly underneath the bulb he can be about 13 inches so higher UVB with less heat. Where the heat is the highest the UVB is lower even though technically itā€™s closer to the bulb just in front of it. Does anyone have this kind of data so you can see how the output decreases as move out from under the bulb?
 
Status
Not open for further replies.

Staff online

Members online

Still Needs Help

Latest resources

Latest posts

Latest profile posts

Day 3 of brumation. It's a struggle. I really miss my little guy. šŸ˜”
Mirage entered brumation yesterday, I'm gonna miss hanging out with my little guy.
Getting ready for another day. Feeling sleepy. šŸ˜“
I just walked into my room and instead of looking at me, Swordtail's eyes darted directly to the ice cream drumstick I'm holding
Finally replaced Swordtail's substrate

Forum statistics

Threads
156,116
Messages
1,257,959
Members
76,088
Latest member
SherlockMommy
Top Bottom