lizardlover123 Member Feb 12, 2012 #1 I plan on using an all oak plywood from Menards for $44 a sheet. What is the best wood sealant for oak plywood? and how many coats do i put on? and at what stage do i seal? Thanks. And please do straight forward answers.
I plan on using an all oak plywood from Menards for $44 a sheet. What is the best wood sealant for oak plywood? and how many coats do i put on? and at what stage do i seal? Thanks. And please do straight forward answers.
lizardlover123 Member Original Poster Feb 12, 2012 #2 also, after i grout the tiles i'm going to use for the ground, do i seal the tiles too? plz respond. thank you so much.
also, after i grout the tiles i'm going to use for the ground, do i seal the tiles too? plz respond. thank you so much.
C CKY Member Feb 13, 2012 #3 it depends on a few things here i dont know if you have already done it but any varnish will work make sure it has low CFCs you can use 2 part epoxyyet again low CFCs + its Best to asamble it and then coat it dont grout
it depends on a few things here i dont know if you have already done it but any varnish will work make sure it has low CFCs you can use 2 part epoxyyet again low CFCs + its Best to asamble it and then coat it dont grout