Ok the 26 watt is a ok uvb but I recommend you swap it out for a long tube fixture 24" for a 40+ gallon tankI'm looking for some opinions on my uvb bulb. It came with the tank set up and isn't over 2 months old yet. Its a Reptisun 10.0 uvb . It says 26w. I don't know much about this subject and want to make sure it correct for him so he doesn't get sick.
Ok I'm going to look into a different one for him. I'll just hope it's simple to mount under the screen! ThanksOk the 26 watt is a ok uvb but I recommend you swap it out for a long tube fixture 24" for a 40+ gallon tank
here is some info on that coil
you want that bulb unobstructed please
The 26w version of the UVB150 is similar in output to a T8 tube when using a reflector. The beam isn't as wide (depending on the length of the tube) but the output strength is very similar. If it was sitting about 6-8'' above the main basking area then it was likely providing adequate UVB. It's the lower wattage (13w) versions that cause concern since they aren't strong enough to provide adequate UVB at a safe distance
Oh forgot to ask. Any suggestions on brand to go with for the hood and bulb? I was going to go with Amazon most likely. But there are always so many things to go thru and it's a hit or miss it gets frustratingOk I'm going to look into a different one for him. I'll just hope it's simple to mount under the screen! Thanks
You can get a clamp and clamp it to the end of the tank w/ the screen slid toward the middle but leaving the basking bulb on the screen -- the double the dome may be a issue you can get a single domeOk I'm going to look into a different one for him. I'll just hope it's simple to mount under the screen! Thanks
Zoo Med 24" comes w/ a 5.0 bulb keep the bulb you can use it for back up but distance and placement is different from the bulb you will need a Reptisun 10.0 T 5 22"Oh forgot to ask. Any suggestions on brand to go with for the hood and bulb? I was going to go with Amazon most likely. But there are always so many things to go thru and it's a hit or miss it gets frustrating
I got the T5 HO Reptisun 24" hood and also the 24w 10.0 uvb bulb. It is on top of the mesh but it doesn't seem to have a way to mount inside..I still have my other uvb on top too bcuz it's in a combo dome with his basking bulb. I think this is ok!Zoo Med 24" comes w/ a 5.0 bulb keep the bulb you can use it for back up but distance and placement is different from the bulb you will need a Reptisun 10.0 T 5 22"
Zoo Med ReptiSun T5 HO Hood
Efficient and sleek t5 UVB light fixture for reptiles terrariums and more! Order your lighting and supplies today from Pangea Reptile.www.pangeareptile.com24" Arcadia ProT5 12% UVB Bulb With HoodZoo Med ReptiSun 10.0 UVB T5 HO
Zoo Med ReptiSun 10.0 UVB T5 HO - Hight Output Linear Lamp for desert reptile terrariums. Shop all lighting supplies at Pangea Reptilewww.pangeareptile.com
24" or 2ft SunBlaster NanoTech T5 HO - Fluorescent Fixture with 6400K Lamp
these are all good fixtures and bulb --- let me know when you get it they certain have distance and placement for them -- your screen will determine where it goes
Please shut the coil off its doing more harm than good ---- you can use this for mounting if the screen is a fine mesh like a screen door if its wide holed it can stay on top of the screen ---https://www.homedepot.com/p/GE-15-ft-Cable-Ties-Hook-and-Loop-Spool-Black-10375/304220195I got the T5 HO Reptisun 24" hood and also the 24w 10.0 uvb bulb. It is on top of the mesh but it doesn't seem to have a way to mount inside..I still have my other uvb on top too bcuz it's in a combo dome with his basking bulb. I think this is ok!