Need advice

Status
Not open for further replies.

Futurebeardiemummy

Member
Original Poster
Yay another fellow Aussie!
With the basking globe do you have a mount for it or a dimmer? I have a 40gal tank so I was thinking I was going to need about a 70W? Or do you use the 60W

Did you get your reptisun online??

Thanks
 

label

Hatchling Member
I swap out the 60w, 75w and 100w depending on the season. I use a thermostat to control the heat light and a timer for the whole enclosure. My flat doesn't get cold enough to need night-time heating. On the Australian beardie board a lot of people just use timers and their experience to decide when and for how long the heat light is on but I don't want to risk roast lizard, especially since I'm not home all the time. I also use fake grass (trimmed close) from Bunnings as the substrate. As she demands to be taken out when she needs to poo, it stays clean.
 

Futurebeardiemummy

Member
Original Poster
Ahh okay thanks why do you swap them around? Donesnt it always need to be the same temp

And what do you mean how long the heat light is on? Isn't it 12-14 hours a day and just have it on when the uvb is on
 

label

Hatchling Member
Because my flat's temperature varies some with the seasons and I like to have the basking light on a lot of the time, I use a lower wattage globe in the summer than winter (it's on the thermostat). On the Aussie board a lot of people work out how much time the lights need to be on and switch them manually or with a separate timer than they use for the UV. If you use a mercury vapour bulb to provide both UV and heat then you have to use a timer; you can't run them on a thermostat.
 

Beardiequeen098

New member
Hey, So I am going to get a beardie soon and I have a few question like is it bad to get a beardie from a breeder where it has a nipped tail, and is it okay too have a 6 1/2 inch baby in a 40 gallon bredder.
 

VenusAndSaturn

Sub-Adult Member
Might be best to make your own post, but just to answer your question. Nip tails are mostly unavoidable with raising beardies from what i know of, so to answer that part no, its completely fine to get a beardie from a good breeder if it has a nipped tail.

As for the next question its also completely fine to have a baby in a 40 gallon as well, even a 75 gallon if its comfortable and healthy.
 
Status
Not open for further replies.

Members online

Still Needs Help

Latest resources

Latest profile posts

Kubet77 là nhà cái đánh giá uy tín hoạt động từ năm 2005, có giấy phép bảo hộ từ PAGCOR, thu hút nhiều người chơi tại Việt Nam và Châu Á nhờ dịch vụ đáng tin cậy. Website: Kubet77 🎖️ Nhà Cái Cá Cược Trực Tuyến Đáng Chơi Nhất 2024 Địa chỉ: Số 27 Đường số 7, Cityland Park Hills,
Go88 là một trong những nhà cái cá cược trực tuyến hàng đầu với danh tiếng vững chắc trong cộng đồng người chơi.
Website: https://https://appgo88.link/
Tag: #appgo88link #go88link #Game_Go88 #Game_bài_Go88 #Cổng_game_Go88 #Tài_xỉu_Go88 #Nạp_tiền_Go88 #Rút_tiền_Go88 #play_Go88
Website:
https://smartcity.bandung.go.id/member/bsc3090527795d
Mirage came out of brumation on April 26. He was doing great. On May 2 he started acting funny. We just redid his tank, and he keeps going into one of his hides. He just lays there. He shows no intrest in food. HELP!
is tape safe for fixing something in my leopard geckos hide?
Day 3 of brumation. It's a struggle. I really miss my little guy. 😔

Forum statistics

Threads
156,236
Messages
1,259,280
Members
76,148
Latest member
appgo88link1
Top Bottom