Hello! New user and first time posting. I am completing my build of a custom enclosure for my daughter's BD, and I need guidance on our lighting setup. These forums are rich in information, and I've been reading much over the last week, but there is so much info it's a little overwhelming. I have a basic setup in mind, but I need thoughts on some particulars.
First, the enclosure:
The dimensions: 59" wide (interior), 24" deep (interior), 24" high (interior).
Plexiglass sliding front doors.
The open back will actually be plexiglass, then enclosure scenery behind, and then a secured backer board to keep the scenery in place.
The "hot" side will be on the left, and I have placed the vent holes (vents not installed yet) accordingly (high on the hot side, low on the cool side).
I have designed this with a solid top--no screen, vent holes, or light holes. The decision was made partly because of the size of the enclosure and my concerns of keeping in warmth. Accordingly, the decision on the height was to facilitate mounting everything inside.
Btw, the bottom will be textured ceramic tile over the sealed wood base.
Here are my questions:
1.) T5 UBV strip light: I understand that the UVB strip should run roughly 75% of width of the enclosure. But at 5 feet enclosure width, would a 3-foot or 4-foot strip be better.
2.) And for this size enclosure, is only one T5 strip sufficient.
2a.) And is T5 itself sufficient?? Do I need T8 instead?
3.) T5 strip placement: would you center the strip front to back? And would you mount the end of the strip flush with the enclosure side or a short distance a way (6" maybe)...does this really affect the coverage?
4.) And for this size enclosure, can you recommend a specific bulb (and fixture too!).
5.) Regarding the basking light (again, this will be on the left side): We currently have one of these in the existing enclosure:
But at 12" height, and mounting (hanging) inside, that doesn't leave a lot of room for adjustment.
Assuming a distance somewhere between 12" and 14" from light to BD, I'm wondering what fixture you would recommend.
Btw, I have my eye on this. I like the mount, but I would have to figure a dome... With this, we would adjust the height of the basking stone and not the lamp... Also, Pangea is sold out of these![Frown :( :(](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
6.) And if you can recommend a fixture (short enough to mount/hang inside) can you specify also a specific bulb.
7.) Finally, would another light (household bulb) be necessary on the cool side?
Thanks all for enduring so many questions! Again, I know all this will have been answered many times, but I think the dimensions of this specific build leave me with lingering concerns.
Cheers!
First, the enclosure:
The dimensions: 59" wide (interior), 24" deep (interior), 24" high (interior).
Plexiglass sliding front doors.
The open back will actually be plexiglass, then enclosure scenery behind, and then a secured backer board to keep the scenery in place.
The "hot" side will be on the left, and I have placed the vent holes (vents not installed yet) accordingly (high on the hot side, low on the cool side).
I have designed this with a solid top--no screen, vent holes, or light holes. The decision was made partly because of the size of the enclosure and my concerns of keeping in warmth. Accordingly, the decision on the height was to facilitate mounting everything inside.
Btw, the bottom will be textured ceramic tile over the sealed wood base.
Here are my questions:
1.) T5 UBV strip light: I understand that the UVB strip should run roughly 75% of width of the enclosure. But at 5 feet enclosure width, would a 3-foot or 4-foot strip be better.
2.) And for this size enclosure, is only one T5 strip sufficient.
2a.) And is T5 itself sufficient?? Do I need T8 instead?
3.) T5 strip placement: would you center the strip front to back? And would you mount the end of the strip flush with the enclosure side or a short distance a way (6" maybe)...does this really affect the coverage?
4.) And for this size enclosure, can you recommend a specific bulb (and fixture too!).
5.) Regarding the basking light (again, this will be on the left side): We currently have one of these in the existing enclosure:
But at 12" height, and mounting (hanging) inside, that doesn't leave a lot of room for adjustment.
Assuming a distance somewhere between 12" and 14" from light to BD, I'm wondering what fixture you would recommend.
Btw, I have my eye on this. I like the mount, but I would have to figure a dome... With this, we would adjust the height of the basking stone and not the lamp... Also, Pangea is sold out of these
6.) And if you can recommend a fixture (short enough to mount/hang inside) can you specify also a specific bulb.
7.) Finally, would another light (household bulb) be necessary on the cool side?
Thanks all for enduring so many questions! Again, I know all this will have been answered many times, but I think the dimensions of this specific build leave me with lingering concerns.
Cheers!
Last edited: