SpitFyre
Sub-Adult Member
Has anybody ever thought about making an expandable enclosure? Have a couple of pieces of glass glued to wooden bottoms, and they would link together like puzzle pieces. There would be top runners to make sure it didn't fall over that would be halfway over each piece, straddling the small gap between pieces. Those would link to gether in the same manner as the bottom pieces. Have some corners that link to the to pieces and provide support, and tiles to lay down and you're set. Put a plastic bag beneath for water protection. The idea was that for a growing beardie or easy transport/storage you could stack the cage, and take the viv with you, thereby minimizing relocation stress and costs. Instead of having to get 2 tanks, you could just make some more pieces! or may be good in a disaster situation, to set up temporary tanks. May not be the best for humidity-loving species. Look at the pics, it's easier to draw than explain (You could also get little connector piece to link a corner(innie) to an "innie" piece.) There would be runnners on top that functioned like the bottom pieces, but weren't glued on. There would also be half-runners to link the top runners to corners and still have them link the sections, or maybe the top wood section of the corners would have to be extended.