Hi all,
I have a 50 gal (36 x 18 x 18) tank, and will be getting a baby beardie here soon this month. However, i am really struggling to figure out what basking/heat light(s) to get. I've just read a lot of different thoughts on the wattage, for example. I'm not sure what to do. I am thinking perhaps a 100w for the basking spot, and a bonus light at a lower wattage at the other end of the cage. What do you guys think?? I just feel clueless and want to get the right things to make sure my future beardie is healthy.
Thank you guys.
EDIT: Also, a ceramic heater-- if I am understanding correctly this is what you get for heating at night? Please correct me if I am wrong. During the day I have the heater on, and it's a comfortable temp. But at night I turn all of the heaters off. Doesn't get freezing, but can get cold for sure especially when the temp drops outside.
Hi all,
I have a 50 gal (36 x 18 x 18) tank, and will be getting a baby beardie here soon this month. However, i am really struggling to figure out what basking/heat light(s) to get. I've just read a lot of different thoughts on the wattage, for example. I'm not sure what to do. I am thinking perhaps a 100w for the basking spot, and a bonus light at a lower wattage at the other end of the cage. What do you guys think?? I just feel clueless and want to get the right things to make sure my future beardie is healthy.
Thank you guys.
EDIT: Also, a ceramic heater-- if I am understanding correctly this is what you get for heating at night? Please correct me if I am wrong. During the day I have the heater on, and it's a comfortable temp. But at night I turn all of the heaters off. Doesn't get freezing, but can get cold for sure especially when the temp drops outside.
Basking bulbs are trial and error- you want a solid clear bright white bulb - examples are Arcadia Halogen - Flukers basking bulb or a Exo Terra Intense bulb - but you MUST have a digital probe thermometer to get the surface basking temps 105-110 for a baby -start w/ a 100 watt for the basking bulb and go from there-- the cool side of the tank should be 80ish-you can use a LED house hold bulb if you dont need the heat on the cool side or get a low watt bulb for that side if you need heat - you want it around 80 or so during the day -- ambient temps at night should be 65-75 - CHE's are good for keeping those temps at night - what are you using for a UVB? NO coils please
Basking bulbs are trial and error- you want a solid clear bright white bulb - examples are Arcadia Halogen - Flukers basking bulb or a Exo Terra Intense bulb - but you MUST have a digital probe thermometer to get the surface basking temps 105-110 for a baby -start w/ a 100 watt for the basking bulb and go from there-- the cool side of the tank should be 80ish-you can use a LED house hold bulb if you dont need the heat on the cool side or get a low watt bulb for that side if you need heat - you want it around 80 or so during the day -- ambient temps at night should be 65-75 - CHE's are good for keeping those temps at night - what are you using for a UVB? NO coils please
Basking bulbs are trial and error- you want a solid clear bright white bulb - examples are Arcadia Halogen - Flukers basking bulb or a Exo Terra Intense bulb - but you MUST have a digital probe thermometer to get the surface basking temps 105-110 for a baby -start w/ a 100 watt for the basking bulb and go from there-- the cool side of the tank should be 80ish-you can use a LED house hold bulb if you dont need the heat on the cool side or get a low watt bulb for that side if you need heat - you want it around 80 or so during the day -- ambient temps at night should be 65-75 - CHE's are good for keeping those temps at night - what are you using for a UVB? NO coils please
This will work, but it is advisable to use the lamp at its standard wattage. Dimmer controls can reduce the power of the light, but this also affects the spectrum emitted by the lamp.
You can use a dimmer control for minor adjustments or for a ceramic heater. This is undoubtedly a useful device for a terrarium.
Yes, it will do. A temperature gun is also a good solution, but the accuracy of its measurements greatly depends on the surface material, so sometimes a gun can show an incorrect measurement result, for example, on the surface of a wicker hammock. To begin with, I would advise you to use the thermometer you found.