Mega Ray and Crossfire

[mishelly58]

They are just staight pieces of metal with holes in them for the screws, but I'll take a picture tomorrow after work have to get batteries for the camera.

 

[andrewlloyd]

Okay, great thankyou

 

[doopie]

I was recommended by the Mega Ray Manufacturer to use the EB60 as it produces no heat. Then get a Halogen lamp for the heat next to it and the Beardie can regulate just hpow much UVB and heat i wants by its position on the basking stand.becasue you can regulate temp with different wattages. Then put a 5000K T-8 bulb across the top for general lighting.

My only concern was power consumption but it would control the temperatures better.

Raymond

 

[ajkry2]

me likee this thread :mrgreen:

 

[mishelly58]

ok so here is a picture of the bracket I used on the enclosure:

as you can see it is just a straight bracket...the next picture shows you that I used 4 of them to hold up the dome the light is in:

Then I used 1X2's and put more brackets on them this is what I use to raise and lower the light based on the temps in the enclosure:

They can be made in different heights depending on the size of the wood and then you can regulate the temps.
I hope this helps

 

[andrewlloyd]

ok so here is a picture of the bracket I used on the enclosure:

as you can see it is just a straight bracket...the next picture shows you that I used 4 of them to hold up the dome the light is in:

Then I used 1X2's and put more brackets on them this is what I use to raise and lower the light based on the temps in the enclosure:

They can be made in different heights depending on the size of the wood and then you can regulate the temps.
I hope this helps

Wow, thats great!
Thankyou so much, i think im defiently going to get a Megaray one my UV tube runs out in a couple of months..