mart
New member
Hi all
I've had the beardy for a few months now and i think I've pieced together most of the important info.
However id like to run things through on the viv.
currently is a 1m long by 30 cm wide 300 cm high wooden viv with a reptile one ceramic lamp with a 50w incandescent bulb working off a habi stat dimer controlling at 36 Celsius and a cool area at 28 degrees.
I also have a 25w reptiglo 10.0 uva/uvb running off a timer for 14 hours a day, this runs just over a quarter length of the viv.
It has a air vent near the basking spot with a small computer fan wired to a battery via some bi-metal strips this activates around 33degrees and pushes air out rather than pulling air into the viv.
The substrate is astro turf and has lot of rocks and bog wood around.
does this sound right and are the lamps of quality?
thanks mart
I've had the beardy for a few months now and i think I've pieced together most of the important info.
However id like to run things through on the viv.
currently is a 1m long by 30 cm wide 300 cm high wooden viv with a reptile one ceramic lamp with a 50w incandescent bulb working off a habi stat dimer controlling at 36 Celsius and a cool area at 28 degrees.
I also have a 25w reptiglo 10.0 uva/uvb running off a timer for 14 hours a day, this runs just over a quarter length of the viv.
It has a air vent near the basking spot with a small computer fan wired to a battery via some bi-metal strips this activates around 33degrees and pushes air out rather than pulling air into the viv.
The substrate is astro turf and has lot of rocks and bog wood around.
does this sound right and are the lamps of quality?
thanks mart
