My son recently was given a bearded dragon. I'm building it an enclosure. I have done some research and started last weekend. Hopefully this turns out ok.
I'm not much of a planner, so I did not draw out anything.
I went with 1/2" plywood and 1X 2 so far.
I'm building a ledge and rock formations using plywood. Not sure how that will turn out. The plan is to seal the wood, then cover with grout.
Edit...Forgot to add dimensions. It is 60" X 24"
Here are a few pics of the progress so far.
I'm not much of a planner, so I did not draw out anything.
I went with 1/2" plywood and 1X 2 so far.
I'm building a ledge and rock formations using plywood. Not sure how that will turn out. The plan is to seal the wood, then cover with grout.
Edit...Forgot to add dimensions. It is 60" X 24"
Here are a few pics of the progress so far.
You could do a low vent on the cool side and a high vent on the hot side, or even a full or partially screened top.
