Tank you, I'm still looking for a platform to bask as the branch is also not directly under the beam.I'd honestly put a rock under the basking light so the beardie doesn't have to balance on a branch just to get some heat
Thank you, I kept some of the styrofoam from the pakagings, that might workThe setup looks good for meThe branch: They look thick, don't think that's a problem. My Taco has the choice and loves sitting an a similar branch (without having to "balance", but he just sits there).
If you'd like to add a rock but keep the weight down: You could make a lightweight "rock" from styrofoam plus tile glue like I did the background. For that you would stack slices of styrofoam and then cover the stack with several layers of tile glue; typically, while the last layer of tile glue is still wet, sand is added. You can even make it hollow so it can double as a hide. There are "thousands" of instructions online e.g. on youtube, usually to be found with "basking platform with hide".
That looks pretty good, that's a clever use of the branches as support beams. That should help distribute the load of the 2nd tank. And it looks good.So I'm two days into building a new tank (spoiler: not for Luis) and this is what I got so far.
Obviously I'm going for a natural looking setup again. The vertical branches are fixed in because I want to stack Luis' tank on top of this one and his is quite heavy.
This is a 210 GAL again, which is the minimum size in Germany to house an adult bearded dragon and I went for a 46" reptisun 10.0 HO UVB in addition to a 100W MHB.
What do you guys think so far? Anyone having experience with stacking tanks this size (two 210 GAL). The branches are obviously quite heavy...
Thanks
View attachment 88352View attachment 88353View attachment 88354View attachment 88355
That looks pretty good, that's a clever use of the branches as support beams. That should help distribute the load of the 2nd tank. And it looks good.
I've done a couple of the Styrofoam items now, what I've found is that they are loud, and superworms will burrow into them given the chance. I used the 2x2 panels from the hardware store, the Styrofoam made of lil balls bonded together might be quiter. But I don't know if it will hold up to being used by a dragon
I'm sure this will work. I used the packaging from a fridgeThank you, I kept some of the styrofoam from the pakagings, that might work
I haven't made the observation they are loud (I'm extremely noise sensitive, can't tolerate noise levels other people think are normal), but it might depend on the complete setup.That looks pretty good, that's a clever use of the branches as support beams. That should help distribute the load of the 2nd tank. And it looks good.
I've done a couple of the Styrofoam items now, what I've found is that they are loud, and superworms will burrow into them given the chance. I used the 2x2 panels from the hardware store, the Styrofoam made of lil balls bonded together might be quiter. But I don't know if it will hold up to being used by a dragon
No, there is luckily no squirting. The only sound is when my dragon really runs and jumps - then the noise is similar to an animal running over stone. I have the setup with parts made from styrofoam and tile glue now for 6 months (since I have my dragon) and anything that makes a "cutting and bending styrofoam" noise would have not survived so long in our householdChris said:Good point with the noise, I can litterally imagine the squirling sound
Thank you for your reply Nick, I was actually getting worried about you, as I always enjoy your insightsOops, looks like I'm late to the party. I have a hell of a lot of work lately.
I'll say my few words. I agree with Lyrebird to create a comfortable basking area.
And also, I see that the main weight of the upper terrarium lies on the side walls of the lower terrarium. This caused the bottom of the upper terrarium to bend a little. It will bend even more after a while if nothing is done. I would make a frame from wood or a metal profile pipe between the bottom of the upper terrarium and the ceiling of the lower one.
The decor in the new house is top notch as always! You are great at designing houses for beardies. I'm looking forward to taking photos with the dragon!
Thanks Chris, I would definitely answer sooner or later anyway.
Yes, transferring the weight of the upper terrarium to the front frame is not the best solution, because after a while it simply will not opened. I would do the following... For the answer you quickly, I made the drawing by hand, I apologize if it turned out a little crooked.
1) the simplest thing you can do, I think it will allow you to level the front edge of the upper terrarium bottom. The square pipe can be replaced with an angular profile.
2) a solution for perfectionists - a reinforcing frame under the entire bottom of the upper terrarium. I have a similar solution working under the router table in my workshop, because the table is made from plywood, but should not bend under the heavy router in the center of the table.
I don’t know what materials are available to you, but I hope that my advice will help in some way
View attachment 88397
You could also use spray foam. Line a bowl with some plastic wrap or wax paper or something, and fill it up, let it dry, then carve it and paint/seal it.The setup looks good for meThe branch: They look thick, don't think that's a problem. My Taco has the choice and loves sitting an a similar branch (without having to "balance", but he just sits there).
If you'd like to add a rock but keep the weight down: You could make a lightweight "rock" from styrofoam plus tile glue like I did the background. For that you would stack slices of styrofoam and then cover the stack with several layers of tile glue; typically, while the last layer of tile glue is still wet, sand is added. You can even make it hollow so it can double as a hide. There are "thousands" of instructions online e.g. on youtube, usually to be found with "basking platform with hide".
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?