We just got this enclosure for our Beardie Ace My lil guy won't bask on the hammock or rock formation under the Carolina Cages UVB + 2 x 75W lamps I have in his enclosure (48Lx18Dx24H).
Instead he seems to prefer under the hammock, or off to the side of the rock formation like in the photo. Any recommendations on what to do? Go to 2 x 50W, 1 x 75W or anything else?
Using a thrive 2-in-1 thermometer and hygrometer it’s showing 120 & climbing. Should I get 50w bulbs?
Am gonna move the rock cave away, what temp should I target?
Using a thrive 2-in-1 thermometer and hygrometer it’s showing 120 & climbing. Should I get 50w bulbs?
Am gonna move the rock cave away, what temp should I target?
You're going to need a digital thermometer with probe end to measure your surface temps. It's the most important temp.
And 120 is way too hot. No higher than 110 at basking SURFACE.
If your thermometer stuck to the glass reading the air temp is saying 120, basking surface is probably much much higher, which is why he's not setting foot on it.
And, no need to have two basking bulbs side by side. Just use one.
I removed one and the temp on the hammock has dropped and settled at 107.2 for now. Do you think that is safe or should I look at picking up a 50W or 2x35W? I’m worried that once the UVB bulb arrives it will raise the temp a lil more. Thoughts?
I removed one and the temp on the hammock has dropped and settled at 107.2 for now. Do you think that is safe or should I look at picking up a 50W or 2x35W? I’m worried that once the UVB bulb arrives it will raise the temp a lil more. Thoughts?
As stated from Brandon please get your surface basking temps to 105-110 taken w/ a digital probe thermometer --- place the probe where he would sit for basking wait 10 min or so and get the temp--basking bulbs are trial and error --- where is your UVB and are you using a coil or a long tube fixture?
As stated from Brandon please get your surface basking temps to 105-110 taken w/ a digital probe thermometer --- place the probe where he would sit for basking wait 10 min or so and get the temp--basking bulbs are trial and error --- where is your UVB and are you using a coil or a long tube fixture?
I am using the thrive digital 2-in-1 hygrometer&thermometer and placed the probe on top of the hammock where I’d expect him to bask. The temp has settled around 107 after about 45 mins. My uvb should be delivered tomorrow and is a long tube from reptisun. I’ll get UVB installed tomorrow and update y’all then. Thank you all so far for helping me out with Aces new home.