I actually have a rankins/Lawsons, but lighting requirements are very similar...
I have a Reptisun 10.0 with a basking light (mini-size incandescent) next to it. I have noticed him looking at the uvb quite a bit lately, and my basking bulb is not very bright when dimmed to give proper temps.
SO - An LED is the only way I can add light without also adding heat :? I just finished mounting an LED 4.5w (40watt equivalent) next to the basking light and uvb tube. It's 2700k so it gives off more of a warm color, fwiw.
It seems really bright, but i guess a 40watt equivalent would be too too bright :?:
Would greatly appreciate some input before I start using it
I don't know much about lights, but I'm interested in an answer if it comes by. I'm thinking of doing something similar.
My question though is where is your UVB bulb? Ideally you want it directly overhead. Bright lights don't do very much to protect the eyes. They are important to simulate the brightness of a very sunny day, but can't protect the eyes if the UVB is pointed directly at them.
Can you use a lower wattage basking bulb so you don't dim it so much?
Thanks MAK
Would a CFL coil style bulb or spot be ok? I know they are not to be used for UVB, but would they be ok for supplemental light like this?
Hey Tater
My understanding is that you need brightness to keep the pupil constricted(?) because the uvb light doesn't cause enough constriction to protect their eyes from damage.... I may be wrong though. I just know that my Reptisun 10.0 is a good bit brighter than the dimmed basking bulb.
Would love some clarification or correction from someone
Thanks MAK
Would a CFL coil style bulb or spot be ok? I know they are not to be used for UVB, but would they be ok for supplemental light like this?
Hey Tater
My understanding is that you need brightness to keep the pupil constricted(?) because the uvb light doesn't cause enough constriction to protect their eyes from damage.... I may be wrong though. I just know that my Reptisun 10.0 is a good bit brighter than the dimmed basking bulb.
Would love some clarification or correction from someone
Yep, you want a nice bright light for just that reason. However, while that is true, it doesn't offer protection if the angle of the light is pointing right in the eye. The pupil can't constrict enough to block out all the light.
I don't know much about lights, but I'm interested in an answer if it comes by. I'm thinking of doing something similar.
My question though is where is your UVB bulb? Ideally you want it directly overhead. Bright lights don't do very much to protect the eyes. They are important to simulate the brightness of a very sunny day, but can't protect the eyes if the UVB is pointed directly at them.
Can you use a lower wattage basking bulb so you don't dim it so much?
Thanks for the info about the light not shining directly into their eyes! Sorry I didn't address the rest of your reply. Let me know if I'm misunderstanding...
The LED that I got is kinda shaped like a spotlight, but isn't very focused at all, and is pointing toward the center of the viv. The walls of the viv are all white, so it gives a lot of bounced light.... The basking light is directly over the basking spot. The uvb tube is 4" from that. And then on the other side of the UVB is where i mounted the LED. Here is the LED light if it helps - http://www.lowes.com/ProductDisplay?productId=50107666
I bought a bunch of bulbs, and the one that i'm using is the one that required the least amount of dimming i believe :?
I have no doubt I'm making this much harder than it is
In the picture above, the incandescent bulb is the basking light. It is directly over the basking spot. I have been reading posts (in addition to Taterbug's above) saying that the UVB should be directly above the basking spot. How do we do that if the basking spot bulb is there? I could move the UVB closer, but worry about the heat from the basking light damaging the uvb tube or fixture? What am i missing here?
They can't exist exactly above/next to each other, but you want them at the same area, aimed at the basking spot. Not one on each end or the tank, or the UVB on the wall or so forth. I think your set up looks ok, it's similar to what I am running actually, I just have one bulb and the tube though. I do feel mine is too dark.
My concern with LEDs would be what the spectra they emit looks like. We have a very different range of visible light than dragons, so the output may look different for them. I haven't studied it, so I can't say one way or another.
Yeah. I won't be using the LED until I see evidence that they are safe. Should have looked into it before buying it :? ...I'm going to see if I can find a small cfl coil bulb that will work there. My cool side is already a few degrees higher than i'd like, so trying to add the least amount of heat possible. Especially with summer coming on.
What I have is a double tube fixture so in one socket I use the uvb and in the other I use a +5000k flourescent light. On the other half of the viv I have a cfl pointed at the far side of the viv so that the whole viv is nice and bright (its 5ft long)
If you want a good full spectrum bulb the Verilux brand bulbs are the best. Their made in Germany and are the only fluorescent bulb to be a true full spectrum. A 5000k bulbs spectrum is almost totally in the 5000k range, not much if any red/green. The Verilux bulbs are technically rated at about 6200k, but in reality are almost totally even across the visible spectrum. I have a couple of 32w T8s and I'm going to put one into the viv I'm going to build (two would probably be overkill with these!). They do also make a 15w T8. The bulbs are about $12 for either on Amazon, but check local lighting retailers as they may be cheaper and the shipping is bloody expensive.
Just realised this was my first post in 6 years...