Your tank looks nice but please upgrade the 5.0 bulb to a 10.0 bulb --- then you can leave on top of your screen it looks to be a wide hole type--- distance should be 8-10 inches directly above a piece of basking decor --- the 5.0 is more for aquarium use and not as strong as the 10.0 - please replace that bulb in approx one year I recommend 10-11 months -- please get rid of the coil UVB and they are no good and will cause all kinds of health problems --- your 18 inch is what brand please ?Today went from a 20 gal to a 67 gal tank. Concerned about lighting moved the old double zoo med to the left of larger tank top 75watt basking with a coil UV. I’m not sure if I should upgrade the basking bulb to 100 watt?? Purchased a 18in 5.0 UV for the left side of the larger tank also for additional UV and light. She definitely noticed the change of the tank and seems rather bothered but I’m hoping she will adjust. Is that common? I put her old carpet in hoping it would comfort her. She wouldn’t eat any crickets this evening but was able to get her to eat a few meal worms. This is my first beardie so I’m hoping to get some advice or any helpful suggestions.
18 in is a zoo med with a reptison bulb.Your tank looks nice but please upgrade the 5.0 bulb to a 10.0 bulb --- then you can leave on top of your screen it looks to be a wide hole type--- distance should be 8-10 inches directly above a piece of basking decor --- the 5.0 is more for aquarium use and not as strong as the 10.0 - please replace that bulb in approx one year I recommend 10-11 months -- please get rid of the coil UVB and they are no good and will cause all kinds of health problems --- your 18 inch is what brand please ?
This morning I went and purchased the UVB 10.0. I removed the coil UVB as suggested. I also purchased a new basking spot set up that brings my beardie closer to the lamp cause the basking spot just didn’t seem as hot as before. I can feel the difference by touch. The larger tank is taller and the screen on top better quality so I feel it blocks more the basking light. I currently use just a thermometer on the back of tank but ordered a laser that will be delivered today so I can get exact measurements on the basking spot and cool side.18 in is a zoo med with a reptison bulb.
You want digital probe thermometers for accurate surface basking temps - I recommend two of them please -- the UVB should be 12-15 inches inside the tank when you get itThis morning I went and purchased the UVB 10.0. I removed the coil UVB as suggested. I also purchased a new basking spot set up that brings my beardie closer to the lamp cause the basking spot just didn’t seem as hot as before. I can feel the difference by touch. The larger tank is taller and the screen on top better quality so I feel it blocks more the basking light. I currently use just a thermometer on the back of tank but ordered a laser that will be delivered today so I can get exact measurements on the basking spot and cool side.
I’m gunna have to figure out how to hang that zoo med UVB inside imagine I can..getting 101 on the new basking level with the gunYou want digital probe thermometers for accurate surface basking temps - I recommend two of them please -- the UVB should be 12-15 inches inside the tank when you get it
IR guns are good but sometimes off they cannot read off of certain materials - please invest in the digital probe thermometers -- I can post some things to use to hang w/I’m gunna have to figure out how to hang that zoo med UVB inside imagine I can..getting 101 on the new basking level with the gun
She seems a bit more calm since I introduced a higher level of basking with the new tank
Please let me know..with the gun getting 102 she seems a lot more happyIR guns are good but sometimes off they cannot read off of certain materials - please invest in the digital probe thermometers -- I can post some things to use to hang w/
3 M command Velcro fasteners- picture hanging wire – long plastic zip ties-- fishing line--Please let me know..with the gun getting 102 she seems a lot more happy
My beardie was getting rather slow and not eating as usual I had already used the UVB and had a 100w basking. I just recently increased the 100w basking to a 150w and she is just full of life right now, chasing her crickets again and acting like herself. I think the temp is finally correct for her and it also brought down the humidity which is a plus. I am a lil worried about the 150w light on the metal top. It is a really well built Repti zoo cage made for reptiles but can anyone tell me if 150 w on the metal top is too much?Your tank looks nice but please upgrade the 5.0 bulb to a 10.0 bulb --- then you can leave on top of your screen it looks to be a wide hole type--- distance should be 8-10 inches directly above a piece of basking decor --- the 5.0 is more for aquarium use and not as strong as the 10.0 - please replace that bulb in approx one year I recommend 10-11 months -- please get rid of the coil UVB and they are no good and will cause all kinds of health problems --- your 18 inch is what brand please ?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?