This is one of the easiest ways to build a nice baby bin rack that is inexpensive and temporary or permanent.
I purchased a 4ft wire rack from Lowes for $60 that has 4 shelves. I assembled it and cut 3 pieces of 1x3 to fit tightly in the undersides between the metal supports, then put a screw in each end to secure it in place. Using a spotlight plate, I drilled a hole in one side so that an extension cord could go through it and wired it to 2 fixtures using heat shrink butt connectors, then mounted it to one end of the board. Then I mounted a 24" Flourescent fixture from Wal Mart by drilling a hole through the middle and fastening with a screw. Done deal, just add bulbs, bins and babies.
I need to do one showing how to wire the lights for those who don't know. I just wish I would have thought of this before I built 6 racks last year. At least when you're done with it, it's still useful as a shelf.
Those are the Target 54 qt bins, they are extras we use at the shows. I use lower ones for my babies and just found some new ones at Wal mart that are 65 quart and not as high sided, but are 16 wide x 22 long. On the racks I built from wood, I spaced the flourescents down closer to the bins by 1.5" to 2" and cut 45º angles on the sides to mount reflectors. The refectors return from 30 to 50 percent of the lost uvb to give a wider and more concentrated coverage area. I've been wanting to get more made at the machine shop, but I would need to get about 50 orders to make it cost effective for everyone. They are a big deal in salt water aquariums, so I don't understand why they are not a standard in the reptile world. I also have climbing branches so the babies can get within 6 to 8 inches of the uvb bulb, but as they get bigger, I have to remove the branches. Then I use 6x6 ramps made from unglazed tile with wood legs glued to one end using construction adhesive.
If anyone is interested in aluminum reflectors, let me know! I have the Solartech meters and can get actual test readings to prove how well they work.
I am a completely foreign to wiring and I feel that the thread didn't do it for me. I need detailed explanations for each step(picture). Wiring can be dangerous, so if it seems vague, I wouldn't even attempt trying it.
I'm almost done with my wooden rack tutorial. It has step by step pictures, measurements, shopping list, everything. I will have pictures of direct wiring of the lights, very simple. Just need a little time to finish it up without getting distracted.
Those are the Target 54 qt bins, they are extras we use at the shows. I use lower ones for my babies and just found some new ones at Wal mart that are 65 quart and not as high sided, but are 16 wide x 22 long. On the racks I built from wood, I spaced the flourescents down closer to the bins by 1.5" to 2" and cut 45º angles on the sides to mount reflectors. The refectors return from 30 to 50 percent of the lost uvb to give a wider and more concentrated coverage area. I've been wanting to get more made at the machine shop, but I would need to get about 50 orders to make it cost effective for everyone. They are a big deal in salt water aquariums, so I don't understand why they are not a standard in the reptile world. I also have climbing branches so the babies can get within 6 to 8 inches of the uvb bulb, but as they get bigger, I have to remove the branches. Then I use 6x6 ramps made from unglazed tile with wood legs glued to one end using construction adhesive.
If anyone is interested in aluminum reflectors, let me know! I have the Solartech meters and can get actual test readings to prove how well they work.
I'm almost done with my wooden rack tutorial. It has step by step pictures, measurements, shopping list, everything. I will have pictures of direct wiring of the lights, very simple. Just need a little time to finish it up without getting distracted.