My freind was throwing out this old dressor so i decided to make a cage out of it.
First i took out the drawers and back off
I screwed in a sheet of 1/2 ply wood onto back following the crossfire design
I Sealed all wood surfaces with two coats of primer and then painted
I got some 20 inch tile, cut to size and installed
I dont have the pictures of it but i installed a 36inch foresent fixture for the uvb and a spot light fixture for the heat bulb
I have a dimmer switch on the heat bulb to requlate temp and drilled two holes on both sides of the tank for the thermo probs
sealed all joints with liquid nails and all cracks with slicone
I used 1/4 glass for the doors
First i took out the drawers and back off
I screwed in a sheet of 1/2 ply wood onto back following the crossfire design
I Sealed all wood surfaces with two coats of primer and then painted
I got some 20 inch tile, cut to size and installed
I dont have the pictures of it but i installed a 36inch foresent fixture for the uvb and a spot light fixture for the heat bulb
I have a dimmer switch on the heat bulb to requlate temp and drilled two holes on both sides of the tank for the thermo probs
sealed all joints with liquid nails and all cracks with slicone
I used 1/4 glass for the doors