Length of UVB Fixture

Status
Not open for further replies.

ComicBookMama

Sub-Adult Member
What size fixture should I be looking for in a UVB fluorescent fixture for a 40B tank? I can find plenty of inexpensive 24” fixtures, but can’t find a 36” for under $60; does the UVB have to run the full length of the tank?

Thanks!

Chris
 

Claudiusx

BD.org Sicko
Staff member
Moderator
Hi chris,

It's better for the tube not to run the full length.

Are you going to be going with the t8 or the HO?

Either way, the 22/24" would be best :)

-Brandon
 

ComicBookMama

Sub-Adult Member
Original Poster
claudiusx":26fd8ley said:
Hi chris,

It's better for the tube not to run the full length.

Are you going to be going with the t8 or the HO?

Either way, the 22/24" would be best :)

-Brandon

Thanks, Brandon... I’m still trying to get a fix on the difference between the T8 and the HO. What would you recommend?

Chris :)
 

Claudiusx

BD.org Sicko
Staff member
Moderator
It all depends really on how you set the rest of your tank up.

The t8 needs to be 6-8 inches from the basking spot, unobstructed. So not on the mesh.

A t5 HO can be on top of the mesh since it's a much stronger output. In a 40g breeder you wont really have the height space to mount it inside as the t5 HOs will be too close. T5s should be 15"~ from the basking surface.

So to put it simply, get the t8 if you're going to be mounting it inside the tank.
Get the t5 HO if you will be placing it ontop of the mesh. :)

-Brandon
 

MrSpectrum

Gray-bearded Member
It confused the heck out of me at first, until I studied the charts on Reptisun's site: https://zoomed.com/wp-content/uploads/Choosing-Correct-UVB-Lamp-2018-07.pdf (PDF)

Counterintuitively (to me, anyway, until Brandon splained me), the thinner T5 bulb is stronger (more powerful?) than the larger dia. T8 bulb. (Different Tech)
If you study the charts carefully for your tank & situation, it should become apparent which is the best choice for you.
 

ComicBookMama

Sub-Adult Member
Original Poster
claudiusx":3595grqr said:
A t5 HO can be on top of the mesh since it's a much stronger output. In a 40g breeder you wont really have the height space to mount it inside as the t5 HOs will be too close. T5s should be 15"~ from the basking surface.

So to put it simply, get the t8 if you're going to be mounting it inside the tank.
Get the t5 HO if you will be placing it ontop of the mesh. :)

I think I'll go with the HO, then... I prefer not to have to mount a fixture inside the tank. Thanks for the tips! One more question: if the HO needs to be about 15" above the basking area, does that mean I shouldn't put a climbing branch in the tank? Would that put my beardie too close to the HO?

-Chris :)
 

Claudiusx

BD.org Sicko
Staff member
Moderator
That recommendation is if the bulb is unobstructed. So if it's on the mesh the dragon will need to be closer. Around 8 inches or so at the basking spot would be good :)

-Brandon
 

ComicBookMama

Sub-Adult Member
Original Poster
claudiusx":2upk6i0g said:
That recommendation is if the bulb is unobstructed. So if it's on the mesh the dragon will need to be closer. Around 8 inches or so at the basking spot would be good :)

Thanks so much, Brandon! I'm getting my tank today and will be getting it set up and ready for my beardie, hopefully tomorrow or Saturday!

Best wishes,
Chris
 
Status
Not open for further replies.

Members online

Latest resources

Latest profile posts

Finally replaced Swordtail's substrate
I miss you so much, Amaris 💔
What is a quick way to warm up a cold beardie? His heating element went out overnight and now he's very cold.
Pearl Girl wrote on moorelori1966's profile.
i feel so sad reading your about me 😢

Forum statistics

Threads
155,988
Messages
1,256,563
Members
76,011
Latest member
sadmuso
Top Bottom