Hello,
I currently have a 4'x2'x2' vivarium. No BD yet. Still setting up the vivarium.
I would like to be able to simulate a sunrise & sunset using LED's. I bought one from Amazon but I noticed that when it is ramping up/down, it flickers a lot. So this would not work.
I have seen a post from charmander16 that has very good information.
viewtopic.php?f=34&t=235017&hilit=led+dimmer
Just wondering if there are updated information about it.
Thanks!
Current setup:
Dual dome (@least 12" from basking area) on right side with one megaray 70 watts UVB lamp in basking area. This raises the temp to about 39 degrees celcius. The other light is a 50 watts Philips Halogen light. When this turns on, it raises the temp to 50 degrees celcius so I currently have this off. I may need a dimmer for this.
Single dome at center for sunrise/sunset with the LED light that I would like to replace due to flickering at ramp time.
Arcadia T5 D3 Desert UVB (24 Watt) on a sunblaster fixture located center back.
CHE 100 watt and Fan on a inkbird temp controller on the left side
I currently have a 4'x2'x2' vivarium. No BD yet. Still setting up the vivarium.
I would like to be able to simulate a sunrise & sunset using LED's. I bought one from Amazon but I noticed that when it is ramping up/down, it flickers a lot. So this would not work.
I have seen a post from charmander16 that has very good information.
viewtopic.php?f=34&t=235017&hilit=led+dimmer
Just wondering if there are updated information about it.
Thanks!
Current setup:
Dual dome (@least 12" from basking area) on right side with one megaray 70 watts UVB lamp in basking area. This raises the temp to about 39 degrees celcius. The other light is a 50 watts Philips Halogen light. When this turns on, it raises the temp to 50 degrees celcius so I currently have this off. I may need a dimmer for this.
Single dome at center for sunrise/sunset with the LED light that I would like to replace due to flickering at ramp time.
Arcadia T5 D3 Desert UVB (24 Watt) on a sunblaster fixture located center back.
CHE 100 watt and Fan on a inkbird temp controller on the left side