Any way to use taller but skinnier enclosure?

Discuss substrates, lighting, heating, enclosure building ideas, share enclosure photos, and talk about any other enclosure-related topics.

Any way to use taller but skinnier enclosure?

Postby nmcnick » Sun Mar 24, 2019 6:11 pm

Hello!

So I'm moving into a new apartment. The one I'm looking at is a little tight in square feet so I was wondering if it's at all feasible to get a taller enclosure but skinnier. Currently I have a vision cage which is about 36 x 24 x 28. Is there any way this would make sense to do? Would it be too difficult to set up lighting for and provide the essential heat gradient? I'm thinking maybe 24" - 30" for width- if this would work what would the recommended height/depth be? My bearded dragon is about 16" so a little smaller than most. He's an adult though at 5 years old.

Thank you!
User avatar
nmcnick
Hatchling Poster
 
Posts: 73
Joined: Tue May 28, 2013 6:03 pm
- Advertisement -
- Advertisement -

Re: Any way to use taller but skinnier enclosure?

Postby KarrieRee » Mon Mar 25, 2019 5:43 am

You dont want to go smaller than a 40 gallon tank and they say you need the length -- not taller as they need the floor space- I am terrible on dimensions ---I am more of a visual person - better person to weigh in on this subject would be Cooperdragon - or Gormagon or one of the other more experienced people--
Karrie
KarrieRee
Gray-bearded Poster
 
Posts: 1604
Joined: Sat Mar 17, 2018 7:24 am

Re: Any way to use taller but skinnier enclosure?

Postby claudiusx » Mon Mar 25, 2019 7:04 am

24 inches long really is too small imo. 36 should be the minimum for an adult. 48 is better but that's obviously not something everyone can manage. They do need the floor space more so than the height.

-Brandon
User avatar
claudiusx
BD.org Sicko
 
Posts: 12898
Joined: Tue Jun 02, 2009 3:44 pm
Location: California

Re: Any way to use taller but skinnier enclosure?

Postby budzoboy » Mon Mar 25, 2019 8:35 am

I have my JoJo in a 36 x 18 x 36 tank and she does quite well
took off the top screen and installed lights with wooden slats![Click image to enlarge]
budzoboy
Hatchling Poster
 
Posts: 68
Joined: Mon Feb 19, 2018 10:00 am
Location: Pittsburgh, Pa.

Re: Any way to use taller but skinnier enclosure?

Postby Gormagon » Mon Mar 25, 2019 10:07 am

Yes, you "could" go higher but, you gain nothing. However, you will lose the ability to maintain a proper heat gradient, the way that you do now. As physics tells us all, Heat Rises. With that taken into consideration, it could possibly get colder than what your dragon is used to on the floor of the viv.

Floor space is critical for dragons as well as climbing areas but, you don't want them to tall because they (I think) have very poor depth perception and, can misjudge distance very easily. The climbing areas should be no more than 12" from the floor for this reason. Broken limbs and backs are common injuries caused by tall climbing areas. I am sure you don't want this to happen to your dragon, heck, I don't even know your dragon and, I don't want it to happen to him either.

If at all possible stick to what you have.
The wonderful world of bearded dragons is a magical land of mystery, enchantment, cuddles, love and, worry! A mysterious realm where things always seem to change in an instant and, the moment you think you have it all figured out, the rules change! You think you own your dragon, guess again. You are now a slave!!!
RIP Peaches 10-1-18 Forever in my Heart
User avatar
Gormagon
Gray-bearded Poster
 
Posts: 2961
Joined: Sat Aug 06, 2016 9:05 pm
Location: Kentucky
- Advertisement -
- Advertisement -


Return to Enclosures

Who is online

Users browsing this forum: No registered users