Lucky Herp 100w MVB

This forum is for advanced discussions on Lighting and Enclosures. Advanced discussions are those that are not necessarily for the general hobbyist, contains practices that should not be applied by those lacking experience, or may be for theoretical discussions that we do not want to have confused with recommended care.

Lucky Herp 100w MVB

Postby CooperDragon » Wed May 19, 2021 4:47 pm

I picked up a Lucky Herp 100w MVB from Chewy ($45) so I could test it out. Doing an initial burn-in now.
It has a nice wide beam and the bulb is similar to the BR40 I have for plain basking. I have it in a fixture that is 16'' off the ground (where I had it for temperature with the basking bulb) and is putting out 3-6 UVI across an 18'' radius at about 12'' above the meter. This is encouraging so far. I like the beam width better than the (disappointing) PowerSun.
Temp reading right under the bulb is around 97 with 81 at the corners of the blanket. This is sitting in the open rather than in an enclosure, so temps may vary.

I'll let it burn in for a while and see what the UVB output degradation looks like. That was the main issue I had with the PowerSun - that went to sub 2 UVI after a week or so. I will post more info as I get it.

[Click image to enlarge]
Image
User avatar
CooperDragon
Moderator
Moderator
 
Posts: 27306
Joined: Thu Mar 27, 2014 8:41 am
Location: Madison, WI
- Advertisement -
- Advertisement -

Re: Lucky Herp 100w MVB

Postby Claudiusx » Wed May 19, 2021 4:51 pm

Nice! that is a promising initial result. Will be interested to see its longevity.

-Brandon
Follow along with all my beardies. Check out my thread here!: Claud's Crew
P.S. We have lots of pictures ;)
Click here if you use a Sunblaster fixture - IMPORTANT
User avatar
Claudiusx
Moderator
Moderator
 
Posts: 19697
Joined: Tue Jun 02, 2009 3:44 pm
Location: California
- Advertisement -
- Advertisement -


Return to Lighting/Enclosures

Who is online

Users browsing this forum: No registered users