kingofnobbys
BD.org Sicko
Am thinking of using QUBELOK connectors to build a new 3 bay beardie apartment building for Rex, Peppa and Toothless. each enclosure with a 4 foot x 2 foot footprint (I think 18" tall each).
See https://www.aluminiumtc.com.au/qubelok/
Essentially will have 1" square black aluminium tubing as my structural elements and 6mm thick clear colourless UV hardened Perspex sheeting for the back and sides (large sheets (long enough to cover for all 3 stacked enclosures) for the back and sides for more rigidity.
I'll have sliding 6mm thick perspect sheets for front doors.
1/2 inch thick marine ply for the tops and bottoms of each enclosure (I'll not be painting these, but lining the bottoms with loose ceramic tile overtop of a 3mm thick Perspex liner.
Not sure if I should use rivets , or glue or self taping screws to hold everything together especially the tubes to the joiners and the Perspex to the aluminium tubing.
Anyone used the QUBELOK or CONNECTIT system to build multibay enclosures ?
How well did they hold together ?
See https://www.aluminiumtc.com.au/qubelok/
Essentially will have 1" square black aluminium tubing as my structural elements and 6mm thick clear colourless UV hardened Perspex sheeting for the back and sides (large sheets (long enough to cover for all 3 stacked enclosures) for the back and sides for more rigidity.
I'll have sliding 6mm thick perspect sheets for front doors.
1/2 inch thick marine ply for the tops and bottoms of each enclosure (I'll not be painting these, but lining the bottoms with loose ceramic tile overtop of a 3mm thick Perspex liner.
Not sure if I should use rivets , or glue or self taping screws to hold everything together especially the tubes to the joiners and the Perspex to the aluminium tubing.
Anyone used the QUBELOK or CONNECTIT system to build multibay enclosures ?
How well did they hold together ?