Hi all! New bearded dragon father here.

If you just got a new beardie, introduce your beardie to the community! If you're a newcomer, say hello and introduce yourself.

Hi all! New bearded dragon father here.

Postby Mightaswell » Thu Feb 25, 2021 4:53 am

Hello,
I'm new to bearded dragons. I'm finishing a 4x2x2 enclosure and came here for advice on bioactive enclosures lighting advice. I understand that I need basking and uvb 10.0 strip lights for the dragon. I'm more concerned about extra light for the plants in choosing, but I'll start a thread on that specific question.
I feed my dragon crickets 3x a day in a plastic bin outside the enclosure. I also give salads but it doesnt appear to eat much of them.
My 4x2x2 enclosure is birch plywood with a sliding door front. The sliding door itself is framed in with 1x3 and 1x2 kiln dried pine. I tried using as much hardwood as I can but I couldn't find birch for the 1x3 and 1x2. I sanded well with 80 grit sand paper. All inside walls and door frame are polyurethane. I put 3 coats of 3x polyurethane(varathane triple thick polyurethane water based interior)inside sanding gently between coats. I waited a full 24hrs between coats because I wanted it to dry right. I used 2 quarts inside. I'm giving it time to finish drying tho. So hopefully monday it will be cured fully. Its not sticky or anything. I can touch it and not leave prints but manufacture label says allow 5 days to cure before using.
I was planning on doing a 50/50 play sand/ organic potting soil bioactive substrate and lining the walls with spineless prickly pear cactus and putting in a mulberry tree and pruning like bonsai.
Well that's about me.
Mightaswell
Newbie Poster
 
Posts: 2
Joined: Thu Feb 25, 2021 4:09 am
- Advertisement -
- Advertisement -

Re: Hi all! New bearded dragon father here.

Postby DorgEndo » Fri Feb 26, 2021 8:26 am

Welcome! I hope you share photos once the enclosure is done

You should look into Arcadia brand for the lighting. They have T5 12% high output UVB good for bearded dragons. And something they call the Jungle Dawn LED bar. The LED would be good for plants. Get them together and they plug in together so only one electrical socket is used. I use the Arcadia UVB, haven't personally tested the LED bar, but that would be my choice.
She/Her. Devlyn my beautiful bearded dragon, approx hatch 8/18, mine since 2/19. Kitty Greysie born 3/06.Charlie the American grey tree frog, found 11/18. MK & Ash the anole sisters. Lots of house plants, I like cacti and succulents.
User avatar
DorgEndo
Juvie Poster
 
Posts: 658
Joined: Mon Feb 04, 2019 7:51 am
Location: MN, USA
- Advertisement -
- Advertisement -


Return to Introductions

Who is online

Users browsing this forum: Google [Bot], pbbeauchamp