New Beardie

Status
Not open for further replies.

Antiant

Member
Hello! my first beardie died because of unknown reasons 2 days ago but now I have a new one! Say hi to-...... I don't have a name for it yet but it'll have one soon!

100752-1539201532.jpg

My setup
100752-2937914343.jpg
 

CooperDragon

BD.org Sicko
Staff member
Moderator
I think the lighting will need an upgrade. During the day you'll want a bright white light that produces heat. I like using PAR38 halogen flood lights. That should sit in a dome fixture like this https://www.theisens.com/products/brooder-lamp-18/2-sjeo-x-6/40820211/
You want to adjust the height so that the surface temperature either along the bottom of that log or the top of the platform he is on gets to around 100-105. The surface temp on the left side of the tank should be around 75-80 or so with a nice gradient between. That will cover the heat portion.

For UVB I would use a 22'' T5 in a tank that size. It can sit right on top of the tank across the basking area (log and platform). This one is excellent and can sit flat along the top http://www.lightyourreptiles.com/22-t-5-ho-fixture-high-output-with-arcadia-d3-12-ho-bulb/

Once you have proper UVB output and temps he should be a pretty happy camper =)
 
Status
Not open for further replies.

Members online

Latest resources

Latest posts

Latest profile posts

Getting ready for another day. Feeling sleepy. 😴
I just walked into my room and instead of looking at me, Swordtail's eyes darted directly to the ice cream drumstick I'm holding
Finally replaced Swordtail's substrate
I miss you so much, Amaris 💔
What is a quick way to warm up a cold beardie? His heating element went out overnight and now he's very cold.

Forum statistics

Threads
156,050
Messages
1,257,168
Members
76,046
Latest member
Lillyjane
Top Bottom