New Enclosure

Discuss substrates, lighting, heating, enclosure building ideas, share enclosure photos, and talk about any other enclosure-related topics.

New Enclosure

Postby susan1919 » Sat Nov 18, 2017 7:59 am

[TOPIC AUTO-LOCKED DUE TO INACTIVITY]

[Click image to enlarge]
I still have a few things to add...But so far does this look ok? MY temps are all good..I want to get something to cover both sides better..I did not grout the tiles and wanted to ask if that will be ok? There is a small crack between them but not very noticable..Did wonder if beardies have every got a nail hung tho..After i realized i was measuring wrong for the basking site it became alot easier..Thanks for all the wonderful advice..
susan1919
Hatchling Poster
 
Posts: 67
Joined: Mon Oct 16, 2017 6:25 pm
Location: North Carolina
- Advertisement -
- Advertisement -

Re: New Enclosure

Postby Bear333 » Sat Nov 18, 2017 8:17 am

Hi there,

Your setup looks pretty great! However, I would recommend a spot where your beardie can get closer to the uvb. Without the right distance, the uvb is pretty much pointless. Also, is it a t8 or a t5?
If your beardie doesn’t have trouble getting around, I’m sure the tile should be fine:) Just keep an eye on him/her to make sure it’s not a problem.
Bear333
Hatchling Poster
 
Posts: 72
Joined: Sun Apr 02, 2017 9:42 am

Re: New Enclosure

Postby susan1919 » Sat Nov 18, 2017 8:23 am

[quote="Bear333"]Hi there,

Your setup looks pretty great! However, I would recommend a spot where your beardie can get closer to the uvb. Without the right distance, the uvb is pretty much pointless. Also, is it a t8 or a t5?
If your beardie doesn’t have trouble getting around, I’m sure the tile should be fine:) Just keep an eye on him/her to make sure it’s not a problem.[/qu The uvb is a T5HO..I have it across the front. Its the 24 inch..Should his basking stones be directly under it? They are about 7 inches high ...Thanks
susan1919
Hatchling Poster
 
Posts: 67
Joined: Mon Oct 16, 2017 6:25 pm
Location: North Carolina
- Advertisement -
- Advertisement -


Return to Enclosures

Who is online

Users browsing this forum: No registered users